Guide based on newznab 11.10, Ubuntu 13 and nZEDb install guide.

Most of this guide is done from the command line (terminal).

0. Misc.

	# For those using an older version of ubuntu, php 5.4 is required. (Ubuntu 12.04 requires backports for php 5.4 a user reported.)

	# If you are using a VMware virtual machine be sure to install the VMware Tools
		sudo apt-get install open-vm-tools
	# Apparmor interferes with some of our files, here is how to disable it:
		sudo /etc/init.d/apparmor stop
		sudo /etc/init.d/apparmor teardown
		sudo update-rc.d -f apparmor remove

	# NOTE:  Both Python 2.7 & Python 3.4 are available by default on 14.04.2
	# The instructions I have done here are Python 3.4 based.
	# I have commented out everything I did not test with.
	# For the threaded scripts you will require the Python cymysql module for mysql:
		# Python 2.*
			#sudo apt-get install python-setuptools python-pip
			#sudo python -m easy_install
			#sudo easy_install cymysql
			#pip list
		# Python 3.* - If Python 3 is installed, the module also must be installed
			sudo apt-get install python3-setuptools python3-pip
			sudo python3 -m easy_install pip
			sudo easy_install3 cymysql


1. Update and upgrade the operating system.

	# Update the sources.
		sudo apt-get update
	# Upgrade the applications.
		sudo apt-get upgrade
	# (OPTIONAL) Optionally run sudo apt-get dist-upgrade to upgrade the kernel.
	# Reboot.
		sudo reboot

2. Install PHP and extensions.

	# Install PHP and the required extensions:
		sudo apt-get install -y php5 php5-dev php-pear php5-gd php5-mysqlnd php5-curl

3. Install MySQL

	# MySQL (Percona)
	# Instructions from https://www.percona.com/doc/percona-server/5.6/installation/apt_repo.html
		sudo apt-key adv --keyserver keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A
		sudo echo -n "deb http://repo.percona.com/apt trusty main" >> /etc/apt/sources.list.d/percona.list
		sudo echo -n "deb-src http://repo.percona.com/apt trusty main" >> /etc/apt/sources.list.d/percona.list

		sudo apt-get update
		sudo apt-get install percona-server-server-5.6 percona-server-client-5.6

4. Install and configure Apache.

	# Install apache:
		sudo apt-get install apache2

	# Configure PHP CLI ini file using the nano text editor:
		sudo nano /etc/php5/cli/php.ini

	## To search in nano, use control+w

	# Change the following settings:
		register_globals = Off
		max_execution_time = 120
	# You can set 1024M to -1 if you have RAM to spare.
		memory_limit = 1024M
	# Change Europe/London to your local timezone, see here for a list: http://php.net/manual/en/timezones.php
	# remove the ; if there is one preceding date.timezone
		date.timezone = Europe/London

	# Press control+x when you are done to save and exit.

	# Configure the PHP apache2 ini file (use the above settings):
		sudo nano /etc/php5/apache2/php.ini

	################
	## Apache 2.4 ##
	################

	You must do the following change to /etc/apache2/apache2.conf:
	Under <Directory /var/www/>, change AllowOverride None to AllowOverride All

	# Create the site config:
	sudo nano /etc/apache2/sites-available/nntmux.conf

	# NOTE: Removed Apache 2.2

	# Paste the following:

<VirtualHost *:80>
	ServerAdmin webmaster@localhost
	ServerName localhost

	# These paths should be fine
	DocumentRoot /var/www/nntmux/www
	ErrorLog /var/log/apache2/error.log
	LogLevel warn
</VirtualHost>

	# Save and exit nano.

	# Disable the default site, enable nntmux, enable rewrite, restart apache:

	sudo a2dissite 000-default
	sudo a2ensite nntmux
	sudo a2enmod rewrite
	sudo service apache2 restart

	*****If you get the following error:**********
	(Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName)

	sudo sh -c 'echo "ServerName localhost" >> /etc/apache2/conf-available/name.conf'
	sudo a2enconf name
	sudo service apache2 restart

	(Should still get an error about /var/www/nntmux/www does not exist)
	**********************************************

5. Install unrar / ffmpeg / mediainfo / lame.

	sudo apt-get install software-properties-common
	sudo apt-get install unrar python-software-properties lame

	sudo apt-get install mediainfo



6. Git clone the nntmux source.

	# If /var/www/ does not exist, create it : mkdir /var/www/  (This should exist)
	cd /var/www/
	#sudo chmod 777 .

	# Install git.
	sudo apt-get install git
	# Clone the git.
	git clone https://github.com/DariusIII/newznab-tmux.git

	# Set the perms.
	#sudo chmod 777 nntmux
	#cd nntmux
	#sudo chmod -R 755 .
	#sudo chmod 777 /var/www/nntmux/libs/smarty/templates_c
	#sudo chmod -R 777 /var/www/nntmux/www/covers
	#sudo chmod 777 /var/www/nntmux/www
	#sudo chmod 777 /var/www/nntmux/www/install
	#sudo chmod -R 777 /var/www/nntmux/nzbfiles

	# More secured apporach (not fully tested)
	sudo chgrp www-data nntmux
	sudo chmod 775 nntmux
	cd nntmux
	sudo chmod -R 755 .
	sudo chgrp www-data /var/www/nntmux/libs/smarty/templates_c
	sudo chmod 775 /var/www/nntmux/libs/smarty/templates_c
	sudo chgrp -R www-data /var/www/nntmux/resources/covers
	sudo chmod -R 775 /var/www/nntmux/resources/covers
	sudo chgrp www-data /var/www/nntmux/www
	sudo chmod 775 /var/www/nntmux/www
	sudo chgrp www-data /var/www/nntmux/www/install
	sudo chmod 775 /var/www/nntmux/www/install
	sudo chgrp -R www-data /var/www/nntmux/resources/nzb
	sudo chmod -R 775 /var/www/nntmux/resources/nzb




7. Install memcache / apc.
	# APC:
		sudo apt-get install php-apc
		sudo service apache2 restart
		sudo cp /usr/share/doc/php5-apcu/apc.php /var/www/nntmux/www/admin

		# Opcache can be validated it is working right by looking at the output of a phpinfo() call
		# ###  Opcode Caching                 Up and Running
		# ###  Optimization                   Enabled

		# In the future you can go to localhost/admin/apc.php in your browser to view apc stats.

	# Memcache:
		sudo apt-get install memcached php5-memcache

		# Edit php.ini, add   extension=memcache.so   in the dynamic extensions section (if you get warnings on apache start you can remove this).
		#	sudo nano /etc/php5/apache2/php.ini

		sudo service apache2 restart

	# Configure /var/lib/php5
		sudo chod o+r /var/lib/php5

8. Run the installer.

	# Change localhost for the server's IP if you are browsing on another computer.
	http://localhost/install

		#############################################################
		# AFTER git cloning and seting up the indexer (step 7 & 8), #
		#    edit config.php and change MEMCACHE_ENABLED to true.   #
		#############################################################
		#	sudo nano /var/www/nntmux/www/config.php


9. Configure the site.

	Enable some groups in view groups.

	Change settings in edit site (set api keys, set paths to unrar etc..)

	# For the majority of the functionality you most likely will want to install these also
	# 7z
	sudo apt-get install p7zip-full
	# par2
	sudo apt-get install par2

10. Start indexing groups.

	Use scripts in misc/update_scripts (update_binaries to get article headers, update_releases to create releases).

	Use scripts in misc/update_scipts/nix_scripts to automate it.