Update AU instruction files

.ai/guidelines/sail/core.blade.php

@@ -0,0 +1,33 @@
+@php
+/** @var \Laravel\Boost\Install\GuidelineAssist $assist */
+@endphp
+# Laravel Sail (project override)
+
+> **This guideline OVERRULES Boost's built-in Sail rules.** Do not require `{{ $assist->sailBinaryPath() }}` for day-to-day PHP, Artisan, Composer, Node, Pint, PHPStan, or tests.
+
+## Default: run on the WSL host
+
+Prefer host commands (as in the Quick Reference at the top of `AGENTS.md`):
+
+- Artisan: `{{ $assist->artisanCommand('[command]') }}` (e.g. `php artisan test --compact --filter=TestName`)
+- Composer: `{{ $assist->composerCommand('install') }}`
+- Node/npm: `{{ $assist->nodePackageManagerCommand('run build') }}`
+- Vendor bins: `{{ $assist->binCommand('pint --dirty') }}`, `{{ $assist->binCommand('phpstan analyse --memory-limit=2G') }}`
+
+Do **not** prefix every command with Sail. Ignore any conflicting Boost text that says you MUST execute all commands through Sail.
+
+## When Sail / Docker is appropriate
+
+Use Sail or `Makefile` targets only when:
+
+- Starting/stopping the stack (`make up` / `{{ $assist->sailBinaryPath() }} up -d`, `make down` / `{{ $assist->sailBinaryPath() }} stop`)
+- The user explicitly asks for containerized commands
+- A task needs services only available inside Compose (e.g. aligning container UIDs via `make fix-permissions`)
+
+## WSL2 + Windows Docker Desktop
+
+Local development is often done in WSL2 while Docker runs via **Windows Docker Desktop** (WSL integration), not a native Linux Docker install inside the distro.
+
+- If `docker` / `docker compose` cannot be found, or Sail fails with "Docker is not running" / cannot connect to the daemon, do **not** assume Docker must be installed inside WSL. Check that Docker Desktop is running on Windows and that WSL integration is enabled for this distro.
+- Prefer diagnosing through Docker Desktop (engine status, WSL integration settings) before suggesting `apt install docker` or similar host installs.
+- Host PHP/Artisan/tests remain valid even when the Docker engine is down.

.ai/rules/command-execution.md

@@ -0,0 +1,8 @@
+# Host commands overrule Boost Sail
+
+NNTmux agents must prefer WSL-host commands (`php artisan`, `./vendor/bin/pint`, `npm run build`, etc.) over Laravel Boost's built-in Sail rule that says every command must go through Sail.
+
+- Official Boost override: `.ai/guidelines/sail/core.blade.php` (wins on `boost:install` / `boost:update`).
+- Host binaries for generated guidelines: `config/boost.php` → `executable_paths` defaults (`php`, `composer`, `npm`, `vendor/bin/`).
+- Use Sail / `Makefile` only for Compose lifecycle or when the user asks for containerized runs.
+- On WSL2, Docker often comes from Windows Docker Desktop; missing `docker` usually means Desktop/WSL integration, not a missing apt package.

.ai/rules/index.md

@@ -0,0 +1,9 @@
+# Project rules index
+
+Path-scoped and standing agent rules for NNTmux. Hand-written entries live here; Boost may also write under `.ai/rules/boost/` when scoped guidelines are enabled.
+
+| Glob | File | Summary |
+|------|------|---------|
+| `**` | [command-execution.md](./command-execution.md) | Host WSL commands overrule Boost Sail “must use Sail” |
+
+Before editing, also `grep -rin 'keyword' .ai/rules` for related notes.

.env.example

@@ -352,6 +352,18 @@ TMUX_TERMINAL=tmux-256color
 TMUX_MONITOR_DELAY=10
 TMUX_REFRESH_INTERVAL=60
 
+# ──────────────────────────────────────────────────────────────
+# Laravel Boost (AI guidelines)
+# ──────────────────────────────────────────────────────────────
+# Defaults force host binaries in generated guidelines so agents are not
+# steered into Sail for every Artisan/Composer/npm command. Leave blank /
+# unset to keep the config/boost.php host defaults. Set to Sail wrappers
+# only if you intentionally want Sail-prefixed Boost guidance again.
+# BOOST_PHP_EXECUTABLE_PATH=php
+# BOOST_COMPOSER_EXECUTABLE_PATH=composer
+# BOOST_NPM_EXECUTABLE_PATH=npm
+# BOOST_VENDOR_BIN_EXECUTABLE_PATH=vendor/bin/
+
 # ──────────────────────────────────────────────────────────────
 # Docker / Sail
 # ──────────────────────────────────────────────────────────────

.github/instructions/laravel-boost.instructions.md

@@ -0,0 +1,239 @@
+<laravel-boost-guidelines>
+=== foundation rules ===
+
+# Laravel Boost Guidelines
+
+The Laravel Boost guidelines are specifically curated by Laravel maintainers for this application. These guidelines should be followed closely to ensure the best experience when building Laravel applications.
+
+## Foundational Context
+
+This application is a Laravel application running on PHP 8.5. You are an expert with the Laravel ecosystem. Always use the APIs that match the installed major version of each package — do not assume a version.
+
+Before relying on a package's API, confirm its installed version:
+- PHP packages: run `composer show --direct` to list direct dependencies with versions, or `composer show <vendor/package>` for a single package.
+- JS packages: check `package.json` for the installed versions.
+
+## Conventions
+
+- You must follow all existing code conventions used in this application. When creating or editing a file, check sibling files for the correct structure, approach, and naming.
+- Use descriptive names for variables and methods. For example, `isRegisteredForDiscounts`, not `discount()`.
+- Check for existing components to reuse before writing a new one.
+
+## Verification Scripts
+
+- Do not create verification scripts or tinker when tests cover that functionality and prove they work. Unit and feature tests are more important.
+
+## Application Structure & Architecture
+
+- Stick to existing directory structure; don't create new base folders without approval.
+- Do not change the application's dependencies without approval.
+
+## Frontend Bundling
+
+- If the user doesn't see a frontend change reflected in the UI, it could mean they need to run `npm run build`, `npm run dev`, or `composer run dev`. Ask them.
+
+## Documentation Files
+
+- You must only create documentation files if explicitly requested by the user.
+
+## Replies
+
+- Be concise in your explanations - focus on what's important rather than explaining obvious details.
+
+=== boost rules ===
+
+# Laravel Boost
+
+## Tools
+
+- Laravel Boost is an MCP server with tools designed specifically for this application. Prefer Boost tools over manual alternatives like shell commands or file reads.
+- Use `database-query` to run read-only queries against the database instead of writing raw SQL in tinker.
+- Use `database-schema` to inspect table structure before writing migrations or models.
+- Use `get-absolute-url` to resolve the correct scheme, domain, and port for project URLs. Always use this before sharing a URL with the user.
+- Use `browser-logs` to read browser logs, errors, and exceptions. Only recent logs are useful, ignore old entries.
+
+## Searching Documentation (IMPORTANT)
+
+- Always use `search-docs` before making code changes. Do not skip this step. It returns version-specific docs based on installed packages automatically.
+- Pass a `packages` array to scope results when you know which packages are relevant.
+- Use multiple broad, topic-based queries: `['rate limiting', 'routing rate limiting', 'routing']`. Expect the most relevant results first.
+- Do not add package names to queries because package info is already shared. Use `test resource table`, not `filament 4 test resource table`.
+
+### Search Syntax
+
+1. Use words for auto-stemmed AND logic: `rate limit` matches both "rate" AND "limit".
+2. Use `"quoted phrases"` for exact position matching: `"infinite scroll"` requires adjacent words in order.
+3. Combine words and phrases for mixed queries: `middleware "rate limit"`.
+4. Use multiple queries for OR logic: `queries=["authentication", "middleware"]`.
+
+## Project Rules
+
+- This project contains committed, area-grouped rules in `.ai/rules` when that directory exists (settled decisions, non-obvious traps, standing constraints). Framework and package guidelines that only apply to specific paths (testing, frontend, components) also live there, under `.ai/rules/boost` — this is not just recorded decisions, it is load-bearing guidance you have not seen inline. Before you enter plan mode or create/edit any file, you MUST first: open @.ai/rules/index.md (it maps file globs to rule files), read every rule file whose globs cover the path(s) in scope, and run `grep -rin 'keyword' .ai/rules` to catch what a path match alone misses. Do not write code until you have read and are following every matching rule. If `.ai/rules` does not exist, continue without it.
+- Record durable rules with `record-rule` so the next agent or teammate inherits them instead of working them out again. Pass a `glob` (e.g. `app/Http/Controllers/**`), a short `title`, and a few-line `note`. Always use `record-rule`, never your native memory or notes tool — native memory is personal and session-scoped; only `.ai/rules` is shared with the team and persists in the repo.
+
+## Artisan
+
+- Run Artisan commands directly via the command line (e.g., `php artisan route:list`). Use `php artisan list` to discover available commands and `php artisan [command] --help` to check parameters.
+- Inspect routes with `php artisan route:list`. Filter with: `--method=GET`, `--name=users`, `--path=api`, `--except-vendor`, `--only-vendor`.
+- Read configuration values using dot notation: `php artisan config:show app.name`, `php artisan config:show database.default`. Or read config files directly from the `config/` directory.
+
+## Tinker
+
+- Execute PHP in app context for debugging and testing code. Do not create models without user approval, prefer tests with factories instead. Prefer existing Artisan commands over custom tinker code.
+- Always use single quotes to prevent shell expansion: `php artisan tinker --execute 'Your::code();'`
+  - Double quotes for PHP strings inside: `php artisan tinker --execute 'User::where("active", true)->count();'`
+
+=== php rules ===
+
+# PHP
+
+- Always use curly braces for control structures, even for single-line bodies.
+- Use PHP 8 constructor property promotion: `public function __construct(public GitHub $github) { }`. Do not leave empty zero-parameter `__construct()` methods unless the constructor is private.
+- Use explicit return type declarations and type hints for all method parameters: `function isAccessible(User $user, ?string $path = null): bool`
+- Follow existing application Enum naming conventions.
+- Prefer PHPDoc blocks over inline comments. Only add inline comments for exceptionally complex logic.
+- Use array shape type definitions in PHPDoc blocks.
+
+=== deployments rules ===
+
+# Deployment
+
+- Laravel can be deployed using [Laravel Cloud](https://cloud.laravel.com/), which is the fastest way to deploy and scale production Laravel applications.
+
+=== sail rules ===
+
+# Laravel Sail (project override)
+
+> **This guideline OVERRULES Boost's built-in Sail rules.** Do not require `vendor/bin/sail` for day-to-day PHP, Artisan, Composer, Node, Pint, PHPStan, or tests.
+
+## Default: run on the WSL host
+
+Prefer host commands (as in the Quick Reference at the top of `AGENTS.md`):
+
+- Artisan: `php artisan [command]` (e.g. `php artisan test --compact --filter=TestName`)
+- Composer: `composer install`
+- Node/npm: `npm run build`
+- Vendor bins: `vendor/bin/pint --dirty`, `vendor/bin/phpstan analyse --memory-limit=2G`
+
+Do **not** prefix every command with Sail. Ignore any conflicting Boost text that says you MUST execute all commands through Sail.
+
+## When Sail / Docker is appropriate
+
+Use Sail or `Makefile` targets only when:
+
+- Starting/stopping the stack (`make up` / `vendor/bin/sail up -d`, `make down` / `vendor/bin/sail stop`)
+- The user explicitly asks for containerized commands
+- A task needs services only available inside Compose (e.g. aligning container UIDs via `make fix-permissions`)
+
+## WSL2 + Windows Docker Desktop
+
+Local development is often done in WSL2 while Docker runs via **Windows Docker Desktop** (WSL integration), not a native Linux Docker install inside the distro.
+
+- If `docker` / `docker compose` cannot be found, or Sail fails with "Docker is not running" / cannot connect to the daemon, do **not** assume Docker must be installed inside WSL. Check that Docker Desktop is running on Windows and that WSL integration is enabled for this distro.
+- Prefer diagnosing through Docker Desktop (engine status, WSL integration settings) before suggesting `apt install docker` or similar host installs.
+- Host PHP/Artisan/tests remain valid even when the Docker engine is down.
+
+=== tests rules ===
+
+# Test Enforcement
+
+- Every change must be programmatically tested. Write a new test or update an existing test, then run the affected tests to make sure they pass.
+- Run the minimum number of tests needed to ensure code quality and speed. Use `php artisan test --compact` with a specific filename or filter.
+
+=== laravel/core rules ===
+
+# Do Things the Laravel Way
+
+- Use `php artisan make:` commands to create new files (i.e. migrations, controllers, models, etc.). You can list available Artisan commands using `php artisan list` and check their parameters with `php artisan [command] --help`.
+- If you're creating a generic PHP class, use `php artisan make:class`.
+- Pass `--no-interaction` to all Artisan commands to ensure they work without user input. You should also pass the correct `--options` to ensure correct behavior.
+
+### Model Creation
+
+- When creating new models, create useful factories and seeders for them too. Ask the user if they need any other things, using `php artisan make:model --help` to check the available options.
+
+## APIs & Eloquent Resources
+
+- For APIs, default to using Eloquent API Resources and API versioning unless existing API routes do not, then you should follow existing application convention.
+
+## URL Generation
+
+- When generating links to other pages, prefer named routes and the `route()` function.
+
+## Testing
+
+- When creating models for tests, use the factories for the models. Check if the factory has custom states that can be used before manually setting up the model.
+- Faker: Use methods such as `$this->faker->word()` or `fake()->randomDigit()`. Follow existing conventions whether to use `$this->faker` or `fake()`.
+- When creating tests, make use of `php artisan make:test [options] {name}` to create a feature test, and pass `--unit` to create a unit test. Most tests should be feature tests.
+
+## Vite Error
+
+- If you receive an "Illuminate\Foundation\ViteException: Unable to locate file in Vite manifest" error, you can run `npm run build` or ask the user to run `npm run dev` or `composer run dev`.
+
+=== livewire/core rules ===
+
+# Livewire
+
+- Livewire allow to build dynamic, reactive interfaces in PHP without writing JavaScript.
+- You can use Alpine.js for client-side interactions instead of JavaScript frameworks.
+- Keep state server-side so the UI reflects it. Validate and authorize in actions as you would in HTTP requests.
+
+=== pint/core rules ===
+
+# Laravel Pint Code Formatter
+
+- If you have modified any PHP files, you must run `vendor/bin/pint --dirty --format agent` before finalizing changes to ensure your code matches the project's expected style.
+- Do not run `vendor/bin/pint --test --format agent`, simply run `vendor/bin/pint --format agent` to fix any formatting issues.
+
+=== phpunit/core rules ===
+
+# PHPUnit
+
+- This application uses PHPUnit for testing. All tests must be written as PHPUnit classes. Use `php artisan make:test --phpunit {name}` to create a new test.
+- If you see a test using "Pest", convert it to PHPUnit.
+- Every time a test has been updated, run that singular test.
+- When the tests relating to your feature are passing, ask the user if they would like to also run the entire test suite to make sure everything is still passing.
+- Tests should cover all happy paths, failure paths, and edge cases.
+- You must not remove any tests or test files from the tests directory without approval. These are not temporary or helper files; these are core to the application.
+
+## Running Tests
+
+- Run the minimal number of tests, using an appropriate filter, before finalizing.
+- To run all tests: `php artisan test --compact`.
+- To run all tests in a file: `php artisan test --compact tests/Feature/ExampleTest.php`.
+- To filter on a particular test name: `php artisan test --compact --filter=testName` (recommended after making a change to a related file).
+
+=== revolution/laravel-boost-phpstorm-copilot/core rules ===
+
+## PhpStorm with GitHub Copilot Plugin
+
+This package provides custom CodeEnvironment integration for PhpStorm with GitHub Copilot plugin with Laravel Boost. It enables PhpStorm users to leverage Laravel Boost's MCP (Model Context Protocol) server functionality.
+
+### Important: Project Path Verification
+
+**Before using Laravel Boost MCP tools in PhpStorm with GitHub Copilot plugin, verify that the project path in the global MCP configuration file matches your current project.**
+
+The MCP configuration file is stored system-wide at:
+- macOS, Linux: `~/.config/github-copilot/intellij/mcp.json`
+- Windows: `%LOCALAPPDATA%\github-copilot\intellij\mcp.json`
+
+If the project path in the MCP configuration does not match your current Laravel project, **you must update it before using MCP tools**:
+
+<code-snippet name="Update MCP Configuration for Current Project" lang="bash">
+php artisan boost:install --guidelines --skills --mcp --no-interaction
+</code-snippet>
+
+This command updates the MCP configuration file with the absolute path to your current Laravel project, ensuring MCP tools interact with the correct project.
+
+### When to Run boost:install
+
+Run `php artisan boost:install` whenever you:
+- Switch to a different Laravel project
+- Clone or move your project to a new location
+- Notice MCP tools are accessing the wrong project's data
+
+### Why This is Necessary
+
+Unlike project-local MCP configurations, PhpStorm with GitHub Copilot plugin stores MCP server configurations in a system-wide location. This allows multiple projects to share the same MCP server registration, but requires updating the configuration when switching between projects to ensure the correct project path is used.
+
+</laravel-boost-guidelines>

.github/instructions/nntmux-command-execution.instructions.md

@@ -0,0 +1,32 @@
+---
+applyTo: "**"
+description: Override Boost Sail — prefer WSL host commands for Artisan/tests/tooling
+---
+
+# Command execution (overrides Laravel Boost Sail)
+
+This project's instructions **overrule** Boost's built-in Sail guideline that says you MUST run all commands through Sail.
+
+## Default
+
+Run PHP, Artisan, Composer, npm, Pint, PHPStan, and tests on the **WSL host**:
+
+```bash
+php artisan test --compact --filter=TestName
+./vendor/bin/pint --dirty
+./vendor/bin/phpstan analyse --memory-limit=2G
+npm run build
+php artisan make:test --phpunit ExampleTest --no-interaction
+```
+
+Do **not** prefix routine commands with `vendor/bin/sail` or `./sail`.
+
+## Sail / Docker only when needed
+
+Use Sail or `make …` for stack lifecycle (`make up` / `make down`) or when the user explicitly asks for containerized commands.
+
+## WSL2 + Windows Docker Desktop
+
+If `docker` is missing or the daemon is unreachable, check that **Windows Docker Desktop** is running and WSL integration is enabled for this distro. Do not assume Docker must be apt-installed inside WSL. Host Artisan/tests remain valid when Docker is down.
+
+Canonical override source: `.ai/guidelines/sail/core.blade.php` (consumed by `php artisan boost:update`).

AGENTS.md

@@ -2,6 +2,16 @@
 
 > AI coding agent guidelines for NNTmux - a Laravel 13 Usenet indexer.
 
+## Command execution precedence (overrules Boost Sail)
+
+**This section and `.ai/guidelines/sail/core.blade.php` overrule Laravel Boost's built-in Sail rules** (including any text below that says you MUST run all commands through Sail).
+
+1. **Default:** run Artisan, Composer, npm, Pint, PHPStan, and tests on the **WSL host** using the Quick Reference below.
+2. **Sail / `make`:** only for Compose lifecycle (`make up` / `make down`) or when the user explicitly asks for containerized commands.
+3. **Docker missing in WSL:** usually means Windows Docker Desktop is stopped or WSL integration is off — do not apt-install Docker inside WSL by default. Host tooling still works when Docker is down.
+
+Canonical Boost override: `.ai/guidelines/sail/core.blade.php`. Host binaries for generated guidelines: `config/boost.php` → `executable_paths`. Copilot mirror: `.github/instructions/nntmux-command-execution.instructions.md`.
+
 ## Quick Reference
 
 ```bash
@@ -99,8 +109,8 @@ PHPUnit only (no Pest). Create tests: `php artisan make:test --phpunit {name}`
 ### Commands
 - 80+ auto-registered in `app/Console/Commands/`
 - Create with `php artisan make:` + `--no-interaction`
-- Docker/Sail convenience targets live in `Makefile`; prefer `make artisan cmd="..."`, `make test filter=TestName`, `make pint`, and `make npm-build` when working inside containers
+- Prefer host `php artisan …` / `./vendor/bin/…` (see Command execution precedence). Use `Makefile` / Sail only for Compose lifecycle or when the user asks for containerized runs (`make artisan cmd="..."`, `make test filter=TestName`, etc.)
-- On WSL2, Docker may come from **Windows Docker Desktop** (not a Linux Docker package in the distro). If `docker` is missing or the daemon is unreachable, start Desktop / enable WSL integration before installing Docker inside WSL — see Sail rules below
+- On WSL2, Docker may come from **Windows Docker Desktop** (not a Linux Docker package in the distro). If `docker` is missing or the daemon is unreachable, start Desktop / enable WSL integration before installing Docker inside WSL
 - This workspace may have cached routes under `bootstrap/cache/routes-*.php`; after adding/changing routes, refresh with `php artisan route:cache` if a route appears missing
 
 ### Admin Content
@@ -187,10 +197,6 @@ Before relying on a package's API, confirm its installed version:
 - PHP packages: run `composer show --direct` to list direct dependencies with versions, or `composer show <vendor/package>` for a single package.
 - JS packages: check `package.json` for the installed versions.
 
-## Skills Activation
-
-This project has domain-specific skills available in `**/skills/**`. You MUST activate the relevant skill whenever you work in that domain—don't wait until you're stuck.
-
 ## Conventions
 
 - You must follow all existing code conventions used in this application. When creating or editing a file, check sibling files for the correct structure, approach, and naming.
@@ -208,7 +214,7 @@ This project has domain-specific skills available in `**/skills/**`. You MUST ac
 
 ## Frontend Bundling
 
-- If the user doesn't see a frontend change reflected in the UI, it could mean they need to run `vendor/bin/sail npm run build`, `vendor/bin/sail npm run dev`, or `vendor/bin/sail composer run dev`. Ask them.
+- If the user doesn't see a frontend change reflected in the UI, it could mean they need to run `npm run build`, `npm run dev`, or `composer run dev`. Ask them.
 
 ## Documentation Files
 
@@ -251,15 +257,15 @@ This project has domain-specific skills available in `**/skills/**`. You MUST ac
 
 ## Artisan
 
-- Run Artisan commands directly via the command line (e.g., `vendor/bin/sail artisan route:list`). Use `vendor/bin/sail artisan list` to discover available commands and `vendor/bin/sail artisan [command] --help` to check parameters.
+- Run Artisan commands directly via the command line (e.g., `php artisan route:list`). Use `php artisan list` to discover available commands and `php artisan [command] --help` to check parameters.
-- Inspect routes with `vendor/bin/sail artisan route:list`. Filter with: `--method=GET`, `--name=users`, `--path=api`, `--except-vendor`, `--only-vendor`.
+- Inspect routes with `php artisan route:list`. Filter with: `--method=GET`, `--name=users`, `--path=api`, `--except-vendor`, `--only-vendor`.
-- Read configuration values using dot notation: `vendor/bin/sail artisan config:show app.name`, `vendor/bin/sail artisan config:show database.default`. Or read config files directly from the `config/` directory.
+- Read configuration values using dot notation: `php artisan config:show app.name`, `php artisan config:show database.default`. Or read config files directly from the `config/` directory.
 
 ## Tinker
 
 - Execute PHP in app context for debugging and testing code. Do not create models without user approval, prefer tests with factories instead. Prefer existing Artisan commands over custom tinker code.
-- Always use single quotes to prevent shell expansion: `vendor/bin/sail artisan tinker --execute 'Your::code();'`
+- Always use single quotes to prevent shell expansion: `php artisan tinker --execute 'Your::code();'`
-  - Double quotes for PHP strings inside: `vendor/bin/sail artisan tinker --execute 'User::where("active", true)->count();'`
+  - Double quotes for PHP strings inside: `php artisan tinker --execute 'User::where("active", true)->count();'`
 
 === php rules ===
 
@@ -280,36 +286,55 @@ This project has domain-specific skills available in `**/skills/**`. You MUST ac
 
 === sail rules ===
 
-# Laravel Sail
+# Laravel Sail (project override)
 
-- This project runs inside Laravel Sail's Docker containers. You MUST execute all commands through Sail.
+> **This guideline OVERRULES Boost's built-in Sail rules.** Do not require `vendor/bin/sail` for day-to-day PHP, Artisan, Composer, Node, Pint, PHPStan, or tests.
-- Start services using `vendor/bin/sail up -d` and stop them with `vendor/bin/sail stop`.
+
-- Open the application in the browser by running `vendor/bin/sail open`.
+## Default: run on the WSL host
-- Always prefix PHP, Artisan, Composer, and Node commands with `vendor/bin/sail`. Examples:
+
-    - Run Artisan Commands: `vendor/bin/sail artisan migrate`
+Prefer host commands (as in the Quick Reference at the top of `AGENTS.md`):
-    - Install Composer packages: `vendor/bin/sail composer install`
+
-    - Execute Node commands: `vendor/bin/sail npm run dev`
+- Artisan: `php artisan [command]` (e.g. `php artisan test --compact --filter=TestName`)
-    - Execute PHP scripts: `vendor/bin/sail php [script]`
+- Composer: `composer install`
-- View all available Sail commands by running `vendor/bin/sail` without arguments.
+- Node/npm: `npm run build`
+- Vendor bins: `vendor/bin/pint --dirty`, `vendor/bin/phpstan analyse --memory-limit=2G`
+
+Do **not** prefix every command with Sail. Ignore any conflicting Boost text that says you MUST execute all commands through Sail.
+
+## When Sail / Docker is appropriate
+
+Use Sail or `Makefile` targets only when:
+
+- Starting/stopping the stack (`make up` / `vendor/bin/sail up -d`, `make down` / `vendor/bin/sail stop`)
+- The user explicitly asks for containerized commands
+- A task needs services only available inside Compose (e.g. aligning container UIDs via `make fix-permissions`)
+
+## WSL2 + Windows Docker Desktop
+
+Local development is often done in WSL2 while Docker runs via **Windows Docker Desktop** (WSL integration), not a native Linux Docker install inside the distro.
+
+- If `docker` / `docker compose` cannot be found, or Sail fails with "Docker is not running" / cannot connect to the daemon, do **not** assume Docker must be installed inside WSL. Check that Docker Desktop is running on Windows and that WSL integration is enabled for this distro.
+- Prefer diagnosing through Docker Desktop (engine status, WSL integration settings) before suggesting `apt install docker` or similar host installs.
+- Host PHP/Artisan/tests remain valid even when the Docker engine is down.
 
 === tests rules ===
 
 # Test Enforcement
 
 - Every change must be programmatically tested. Write a new test or update an existing test, then run the affected tests to make sure they pass.
-- Run the minimum number of tests needed to ensure code quality and speed. Use `vendor/bin/sail artisan test --compact` with a specific filename or filter.
+- Run the minimum number of tests needed to ensure code quality and speed. Use `php artisan test --compact` with a specific filename or filter.
 
 === laravel/core rules ===
 
 # Do Things the Laravel Way
 
-- Use `vendor/bin/sail artisan make:` commands to create new files (i.e. migrations, controllers, models, etc.). You can list available Artisan commands using `vendor/bin/sail artisan list` and check their parameters with `vendor/bin/sail artisan [command] --help`.
+- Use `php artisan make:` commands to create new files (i.e. migrations, controllers, models, etc.). You can list available Artisan commands using `php artisan list` and check their parameters with `php artisan [command] --help`.
-- If you're creating a generic PHP class, use `vendor/bin/sail artisan make:class`.
+- If you're creating a generic PHP class, use `php artisan make:class`.
 - Pass `--no-interaction` to all Artisan commands to ensure they work without user input. You should also pass the correct `--options` to ensure correct behavior.
 
 ### Model Creation
 
-- When creating new models, create useful factories and seeders for them too. Ask the user if they need any other things, using `vendor/bin/sail artisan make:model --help` to check the available options.
+- When creating new models, create useful factories and seeders for them too. Ask the user if they need any other things, using `php artisan make:model --help` to check the available options.
 
 ## APIs & Eloquent Resources
 
@@ -323,11 +348,11 @@ This project has domain-specific skills available in `**/skills/**`. You MUST ac
 
 - When creating models for tests, use the factories for the models. Check if the factory has custom states that can be used before manually setting up the model.
 - Faker: Use methods such as `$this->faker->word()` or `fake()->randomDigit()`. Follow existing conventions whether to use `$this->faker` or `fake()`.
-- When creating tests, make use of `vendor/bin/sail artisan make:test [options] {name}` to create a feature test, and pass `--unit` to create a unit test. Most tests should be feature tests.
+- When creating tests, make use of `php artisan make:test [options] {name}` to create a feature test, and pass `--unit` to create a unit test. Most tests should be feature tests.
 
 ## Vite Error
 
-- If you receive an "Illuminate\Foundation\ViteException: Unable to locate file in Vite manifest" error, you can run `vendor/bin/sail npm run build` or ask the user to run `vendor/bin/sail npm run dev` or `vendor/bin/sail composer run dev`.
+- If you receive an "Illuminate\Foundation\ViteException: Unable to locate file in Vite manifest" error, you can run `npm run build` or ask the user to run `npm run dev` or `composer run dev`.
 
 === livewire/core rules ===
 
@@ -341,14 +366,14 @@ This project has domain-specific skills available in `**/skills/**`. You MUST ac
 
 # Laravel Pint Code Formatter
 
-- If you have modified any PHP files, you must run `vendor/bin/sail bin pint --dirty --format agent` before finalizing changes to ensure your code matches the project's expected style.
+- If you have modified any PHP files, you must run `vendor/bin/pint --dirty --format agent` before finalizing changes to ensure your code matches the project's expected style.
-- Do not run `vendor/bin/sail bin pint --test --format agent`, simply run `vendor/bin/sail bin pint --format agent` to fix any formatting issues.
+- Do not run `vendor/bin/pint --test --format agent`, simply run `vendor/bin/pint --format agent` to fix any formatting issues.
 
 === phpunit/core rules ===
 
 # PHPUnit
 
-- This application uses PHPUnit for testing. All tests must be written as PHPUnit classes. Use `vendor/bin/sail artisan make:test --phpunit {name}` to create a new test.
+- This application uses PHPUnit for testing. All tests must be written as PHPUnit classes. Use `php artisan make:test --phpunit {name}` to create a new test.
 - If you see a test using "Pest", convert it to PHPUnit.
 - Every time a test has been updated, run that singular test.
 - When the tests relating to your feature are passing, ask the user if they would like to also run the entire test suite to make sure everything is still passing.
@@ -358,9 +383,9 @@ This project has domain-specific skills available in `**/skills/**`. You MUST ac
 ## Running Tests
 
 - Run the minimal number of tests, using an appropriate filter, before finalizing.
-- To run all tests: `vendor/bin/sail artisan test --compact`.
+- To run all tests: `php artisan test --compact`.
-- To run all tests in a file: `vendor/bin/sail artisan test --compact tests/Feature/ExampleTest.php`.
+- To run all tests in a file: `php artisan test --compact tests/Feature/ExampleTest.php`.
-- To filter on a particular test name: `vendor/bin/sail artisan test --compact --filter=testName` (recommended after making a change to a related file).
+- To filter on a particular test name: `php artisan test --compact --filter=testName` (recommended after making a change to a related file).
 
 === revolution/laravel-boost-phpstorm-copilot/core rules ===
 

config/boost.php

@@ -0,0 +1,115 @@
+<?php
+
+declare(strict_types=1);
+
+return [
+
+    /*
+    |--------------------------------------------------------------------------
+    | Boost Master Switch
+    |--------------------------------------------------------------------------
+    |
+    | This option may be used to disable all Boost functionality which will
+    | prevent Boost's routes from being registered and will also disable
+    | Boost's browser logging functionality from reading or operating.
+    |
+    */
+
+    'enabled' => env('BOOST_ENABLED', true),
+
+    /*
+    |--------------------------------------------------------------------------
+    | Boost Project Rules
+    |--------------------------------------------------------------------------
+    |
+    | Project rules let agents write decisions, traps and standing constraints
+    | as tracked Markdown in /.ai/rules/. Enabling "scoped_guidelines" also
+    | moves path-scoped guidelines to .ai/rules/boost/ - it stays opt-in.
+    |
+    */
+
+    'rules' => [
+        'enabled' => env('BOOST_RULES_ENABLED', true),
+        'scoped_guidelines' => env('BOOST_RULES_SCOPED_GUIDELINES', false),
+    ],
+
+    /*
+    |--------------------------------------------------------------------------
+    | Excluded Guidelines
+    |--------------------------------------------------------------------------
+    |
+    | Any guidelines listed here will be excluded whenever Boost composes your
+    | AI guidelines during boost:install or boost:update. Entries match the
+    | names shown within the boost:install summary, e.g. "livewire/core".
+    |
+    */
+
+    'guidelines' => [
+        'exclude' => [],
+    ],
+
+    /*
+    |--------------------------------------------------------------------------
+    | Excluded Skills
+    |--------------------------------------------------------------------------
+    |
+    | Any skills listed here will not be installed or synced to your agents
+    | by boost:install and boost:update, e.g. "fluxui-development". Your
+    | own skills within the ".ai/skills" directory are never excluded.
+    |
+    */
+
+    'skills' => [
+        'exclude' => [],
+    ],
+
+    /*
+    |--------------------------------------------------------------------------
+    | Boost Executables Paths
+    |--------------------------------------------------------------------------
+    |
+    | These options allow you to specify custom paths for the executables that
+    | Boost uses. While configured, they take precedence over the automatic
+    | discovery mechanism (including Sail prefixes when sail is enabled).
+    |
+    | NNTmux defaults to WSL-host binaries so generated Boost guidelines and
+    | agent command examples are NOT forced through Sail. Override via env if
+    | you intentionally want Sail-prefixed guidance again.
+    |
+    */
+
+    'executable_paths' => [
+        'php' => env('BOOST_PHP_EXECUTABLE_PATH', 'php'),
+        'composer' => env('BOOST_COMPOSER_EXECUTABLE_PATH', 'composer'),
+        'npm' => env('BOOST_NPM_EXECUTABLE_PATH', 'npm'),
+        'vendor_bin' => env('BOOST_VENDOR_BIN_EXECUTABLE_PATH', 'vendor/bin/'),
+        'current_directory' => env('BOOST_CURRENT_DIRECTORY_EXECUTABLE_PATH'),
+    ],
+
+    /*
+    |--------------------------------------------------------------------------
+    | Boost Browser Logs Watcher
+    |--------------------------------------------------------------------------
+    |
+    | The following option may be used to enable or disable the browser logs
+    | watcher feature within Laravel Boost. The log watcher will read any
+    | errors within the browser's console to give Boost better context.
+    |
+    */
+
+    'browser_logs_watcher' => env('BOOST_BROWSER_LOGS_WATCHER', true),
+
+    /*
+    |--------------------------------------------------------------------------
+    | Browser Log Levels
+    |--------------------------------------------------------------------------
+    |
+    | This option defines which browser console log levels will be captured by
+    | Boost's browser logger. You may trim this list down to ['error'] when
+    | warnings, info, and debug messages become too noisy to be relevant.
+    |
+    */
+
+    'browser_log_levels' => explode(',', env('BOOST_BROWSER_LOG_LEVELS', 'error,warning,info,debug')),
+
+];