diff --git a/Changelog b/Changelog
index 0512efa90..320e79a2f 100755
--- a/Changelog
+++ b/Changelog
@@ -1,4 +1,5 @@
2016-02-23 DariusIII
+ Add: Add ubuntu install guide when installer will be available
Chg: Update the removeWMV function on ReleaseRemover.
Chg: Remove unneccessary MYSQL_ATTR_INIT_COMMAND from PDO dsn options array. This was only
needed before PHP 5.3.6 as 'charset' was ignored.
diff --git a/docs/Ubuntu-14.04.2-Install.txt b/docs/Ubuntu-14.04.2-Install.txt
new file mode 100644
index 000000000..27e4b5e1a
--- /dev/null
+++ b/docs/Ubuntu-14.04.2-Install.txt
@@ -0,0 +1,224 @@
+Guide based on newznab 11.10, Ubuntu 13 and nZEDb install guide.
+
+Most of this guide is done from the command line (terminal).
+
+0. Misc.
+
+ # For those using an older version of ubuntu, php 5.4 is required. (Ubuntu 12.04 requires backports for php 5.4 a user reported.)
+
+ # If you are using a VMware virtual machine be sure to install the VMware Tools
+ sudo apt-get install open-vm-tools
+ # Apparmor interferes with some of our files, here is how to disable it:
+ sudo /etc/init.d/apparmor stop
+ sudo /etc/init.d/apparmor teardown
+ sudo update-rc.d -f apparmor remove
+
+ # NOTE: Both Python 2.7 & Python 3.4 are available by default on 14.04.2
+ # The instructions I have done here are Python 3.4 based.
+ # I have commented out everything I did not test with.
+ # For the threaded scripts you will require the Python cymysql module for mysql:
+ # Python 2.*
+ #sudo apt-get install python-setuptools python-pip
+ #sudo python -m easy_install
+ #sudo easy_install cymysql
+ #pip list
+ # Python 3.* - If Python 3 is installed, the module also must be installed
+ sudo apt-get install python3-setuptools python3-pip
+ sudo python3 -m easy_install pip
+ sudo easy_install3 cymysql
+
+
+1. Update and upgrade the operating system.
+
+ # Update the sources.
+ sudo apt-get update
+ # Upgrade the applications.
+ sudo apt-get upgrade
+ # (OPTIONAL) Optionally run sudo apt-get dist-upgrade to upgrade the kernel.
+ # Reboot.
+ sudo reboot
+
+2. Install PHP and extensions.
+
+ # Install PHP and the required extensions:
+ sudo apt-get install -y php5 php5-dev php-pear php5-gd php5-mysqlnd php5-curl
+
+3. Install MySQL
+
+ # MySQL (Percona)
+ # Instructions from https://www.percona.com/doc/percona-server/5.6/installation/apt_repo.html
+ sudo apt-key adv --keyserver keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A
+ sudo echo -n "deb http://repo.percona.com/apt trusty main" >> /etc/apt/sources.list.d/percona.list
+ sudo echo -n "deb-src http://repo.percona.com/apt trusty main" >> /etc/apt/sources.list.d/percona.list
+
+ sudo apt-get update
+ sudo apt-get install percona-server-server-5.6 percona-server-client-5.6
+
+4. Install and configure Apache.
+
+ # Install apache:
+ sudo apt-get install apache2
+
+ # Configure PHP CLI ini file using the nano text editor:
+ sudo nano /etc/php5/cli/php.ini
+
+ ## To search in nano, use control+w
+
+ # Change the following settings:
+ register_globals = Off
+ max_execution_time = 120
+ # You can set 1024M to -1 if you have RAM to spare.
+ memory_limit = 1024M
+ # Change Europe/London to your local timezone, see here for a list: http://php.net/manual/en/timezones.php
+ # remove the ; if there is one preceding date.timezone
+ date.timezone = Europe/London
+
+ # Press control+x when you are done to save and exit.
+
+ # Configure the PHP apache2 ini file (use the above settings):
+ sudo nano /etc/php5/apache2/php.ini
+
+ ################
+ ## Apache 2.4 ##
+ ################
+
+ You must do the following change to /etc/apache2/apache2.conf:
+ Under , change AllowOverride None to AllowOverride All
+
+ # Create the site config:
+ sudo nano /etc/apache2/sites-available/nntmux.conf
+
+ # NOTE: Removed Apache 2.2
+
+ # Paste the following:
+
+
+ ServerAdmin webmaster@localhost
+ ServerName localhost
+
+ # These paths should be fine
+ DocumentRoot /var/www/nntmux/www
+ ErrorLog /var/log/apache2/error.log
+ LogLevel warn
+
+
+ # Save and exit nano.
+
+ # Disable the default site, enable nntmux, enable rewrite, restart apache:
+
+ sudo a2dissite 000-default
+ sudo a2ensite nntmux
+ sudo a2enmod rewrite
+ sudo service apache2 restart
+
+ *****If you get the following error:**********
+ (Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName)
+
+ sudo sh -c 'echo "ServerName localhost" >> /etc/apache2/conf-available/name.conf'
+ sudo a2enconf name
+ sudo service apache2 restart
+
+ (Should still get an error about /var/www/nntmux/www does not exist)
+ **********************************************
+
+5. Install unrar / ffmpeg / mediainfo / lame.
+
+ sudo apt-get install software-properties-common
+ sudo apt-get install unrar python-software-properties lame
+
+ sudo apt-get install mediainfo
+
+
+
+6. Git clone the nntmux source.
+
+ # If /var/www/ does not exist, create it : mkdir /var/www/ (This should exist)
+ cd /var/www/
+ #sudo chmod 777 .
+
+ # Install git.
+ sudo apt-get install git
+ # Clone the git.
+ git clone https://github.com/DariusIII/newznab-tmux.git
+
+ # Set the perms.
+ #sudo chmod 777 nntmux
+ #cd nntmux
+ #sudo chmod -R 755 .
+ #sudo chmod 777 /var/www/nntmux/libs/smarty/templates_c
+ #sudo chmod -R 777 /var/www/nntmux/www/covers
+ #sudo chmod 777 /var/www/nntmux/www
+ #sudo chmod 777 /var/www/nntmux/www/install
+ #sudo chmod -R 777 /var/www/nntmux/nzbfiles
+
+ # More secured apporach (not fully tested)
+ sudo chgrp www-data nntmux
+ sudo chmod 775 nntmux
+ cd nntmux
+ sudo chmod -R 755 .
+ sudo chgrp www-data /var/www/nntmux/libs/smarty/templates_c
+ sudo chmod 775 /var/www/nntmux/libs/smarty/templates_c
+ sudo chgrp -R www-data /var/www/nntmux/resources/covers
+ sudo chmod -R 775 /var/www/nntmux/resources/covers
+ sudo chgrp www-data /var/www/nntmux/www
+ sudo chmod 775 /var/www/nntmux/www
+ sudo chgrp www-data /var/www/nntmux/www/install
+ sudo chmod 775 /var/www/nntmux/www/install
+ sudo chgrp -R www-data /var/www/nntmux/resources/nzb
+ sudo chmod -R 775 /var/www/nntmux/resources/nzb
+
+
+
+
+7. Install memcache / apc.
+ # APC:
+ sudo apt-get install php-apc
+ sudo service apache2 restart
+ sudo cp /usr/share/doc/php5-apcu/apc.php /var/www/nntmux/www/admin
+
+ # Opcache can be validated it is working right by looking at the output of a phpinfo() call
+ # ### Opcode Caching Up and Running
+ # ### Optimization Enabled
+
+ # In the future you can go to localhost/admin/apc.php in your browser to view apc stats.
+
+ # Memcache:
+ sudo apt-get install memcached php5-memcache
+
+ # Edit php.ini, add extension=memcache.so in the dynamic extensions section (if you get warnings on apache start you can remove this).
+ # sudo nano /etc/php5/apache2/php.ini
+
+ sudo service apache2 restart
+
+ # Configure /var/lib/php5
+ sudo chod o+r /var/lib/php5
+
+8. Run the installer.
+
+ # Change localhost for the server's IP if you are browsing on another computer.
+ http://localhost/install
+
+ #############################################################
+ # AFTER git cloning and seting up the indexer (step 7 & 8), #
+ # edit config.php and change MEMCACHE_ENABLED to true. #
+ #############################################################
+ # sudo nano /var/www/nntmux/www/config.php
+
+
+9. Configure the site.
+
+ Enable some groups in view groups.
+
+ Change settings in edit site (set api keys, set paths to unrar etc..)
+
+ # For the majority of the functionality you most likely will want to install these also
+ # 7z
+ sudo apt-get install p7zip-full
+ # par2
+ sudo apt-get install par2
+
+10. Start indexing groups.
+
+ Use scripts in misc/update_scripts (update_binaries to get article headers, update_releases to create releases).
+
+ Use scripts in misc/update_scipts/nix_scripts to automate it.