newznab-tmux-NNTmux/DOCKER.md

Docker Development Environment

Docker / Sail setup for NNTmux — a Laravel 12 Usenet indexer.

Prerequisites

• Docker & Docker Compose v2.22+ (the Makefile uses pull --ignore-buildable)
• A GitHub (scopeless) token for Composer private packages
• Laravel Sail (included as a dev dependency)

Quick Start

# 1. Copy and configure your environment
cp .env.example .env
# Edit .env — set DB credentials, COMPOSER_AUTH, and uncomment the
# "Docker service hostnames" block at the bottom.

# 2. Build and start
make build
make up

# 3. Install NNTmux (first run only)
make artisan cmd="nntmux:install"

# 4. Build frontend assets
make npm-build

Environment Configuration

When running via Docker, uncomment the Docker service hostnames block at the bottom of .env so the app resolves container names:

DB_HOST=mariadb
REDIS_HOST=redis
MANTICORESEARCH_HOST=manticore
ELASTICSEARCH_HOST=elasticsearch
MAIL_HOST=mailpit
MAIL_PORT=1025

Search Engine Selection

Set COMPOSE_PROFILES in .env to match your SEARCH_DRIVER:

SEARCH_DRIVER	COMPOSE_PROFILES
manticore	manticore
elasticsearch	elasticsearch

Only the selected search service container will start. The other remains dormant and consumes no resources.

ManticoreSearch Image Updates

Both docker-compose.yml and docker-compose.yml.prod-dist intentionally use the unpinned manticoresearch/manticore image. This keeps ManticoreSearch on the latest published Docker image whenever images are pulled, but it also means production can receive ManticoreSearch changes without a repository diff.

Before pulling and restarting production, validate the new image in staging by creating indexes, indexing a small batch, and running representative searches, filters, sorting, pagination, deletes, suggestions, fuzzy searches, and any raw SQL diagnostics/reconciliation commands.

Manticore Search 27.1.5 is part of the 25.x-27.x release line that introduced built-in authentication/authorization, sharded tables, conversational search, vector-search improvements, and replication layout changes. The app does not enable Manticore auth by default, but if auth is enabled on the server set either MANTICORESEARCH_USERNAME/MANTICORESEARCH_PASSWORD or MANTICORESEARCH_TOKEN before running the app, index-creation commands, or raw HTTP diagnostics. Roll auth out in staging first; anonymous local Docker usage continues to work with these variables blank.

Native Ubuntu/Debian package installs are managed by systemd, not Docker. If the package install fails while starting manticore.service, especially with Status: "Replaying binlogs..." and accept() failed ... Too many open files, or if searchd prints a backtrace during binlog replay, use docs/manticore-ubuntu-package.md to raise the service file descriptor limit, preserve crash evidence, quarantine bad binlogs if needed, and finish dpkg configuration.

Make Targets

Run make or make help to see all targets, grouped by section.

Lifecycle

Target	Description
make up	Start all services (detached)
make down	Stop all services
make restart	Restart all services
make recreate	Force-recreate containers without rebuilding
make build	Build the app image (cached)
make rebuild	Pull fresh base images + --no-cache build + force-recreate
make pull	Pull latest enabled-profile base images (skips buildable ones)
make update	Infra-only: pull + --pull build + restart
make upgrade	App upgrade: update + composer + npm + migrate + caches
make fresh	Destroy volumes, pull, rebuild, recreate (DATA LOSS)

Development

Target	Description
make shell	Bash shell in the app container
make root-shell	Root bash shell in the app container
make tinker	Laravel Tinker REPL
make artisan cmd=	Run any artisan command
make migrate	Run pending migrations
make migrate-fresh	Drop all tables and re-migrate (DATA LOSS)
make seed	Run database seeders
make cache-clear	Clear config / route / view / app caches (and stale bootstrap/cache files)
make optimize	Dev-safe: warm view cache + spatie/laravel-data
make optimize-deploy	Production: also caches config/routes (bakes absolute paths)
make queue-work	Foreground queue worker
make queue-restart	Signal queue workers to restart
make tmux-start	Start the NNTmux tmux processing engine
make tmux-stop	Stop the tmux processing engine
make tmux-attach	Attach to the running tmux session
make horizon	Show Horizon queue status
make fix-permissions	Chown project to host UID + register git safe.directory
make fix-permissions	Chown project to sail + register git safe.directory

Testing & Quality

Target	Description
make test	PHPUnit tests (filter=Name optional)
make pint	Pint formatter on dirty files
make pint-all	Pint formatter on all files
make phpstan	PHPStan static analysis (2G memory limit)
make rector	Rector dry-run (no changes)
make rector-fix	Apply Rector refactorings

Frontend & Types

Target	Description
make npm-build	npm install + npm run build
make npm-dev	Start Vite dev server
make ts-types	Regenerate TypeScript types
make ts-types-check	CI: fail if generated types drift
make data-cache	Cache spatie/laravel-data structures

Logs & Status

Target	Description
make logs	Tail all container logs (or SERVICE=name for one)
make tail-laravel	Tail storage/logs/laravel.log inside the app container
make status / ps	Show running containers
make top	Show processes inside each container
make images	Show images used by each service
make health	Healthcheck status per service

Cleanup

Target	Description
make clean	Prune stopped containers / dangling images
make nuke	Remove ALL project containers, images, volumes (DATA LOSS)

Flags

These can be combined with the targets above:

Flag	Effect
FORCE=1	Skip confirmation prompts on fresh, nuke, migrate-fresh (CI use)
MAINTENANCE=1	Wrap upgrade migrations in artisan down / artisan up
SERVICE=name	Restrict logs to a specific compose service
CMD="…"	Free-form command for artisan (alternative to cmd=)
filter=Name	Pass --filter=Name to make test

Examples:

make fresh FORCE=1                      # non-interactive teardown + rebuild
make upgrade MAINTENANCE=1              # zero-downtime-ish upgrade with maint mode
make logs SERVICE=mariadb               # tail only mariadb
make test filter=ReleaseSearchTest      # run a single test

Note: make pull / update / rebuild use docker compose pull --ignore-buildable, which only pulls images for services in the active COMPOSE_PROFILES and skips images that are built locally (e.g. sail-8.5/app). Requires Docker Compose v2.22+.

You can also use ./sail directly for anything not covered above — unknown commands are passed through to docker compose.

Networking

Sail creates a Docker network called sail with these default port mappings:

Service	Container Port	Host Port (default)
HTTP (nginx)	80	APP_PORT (80)
Vite	5173	VITE_PORT (5173)
MariaDB	3306	FORWARD_DB_PORT (3306)
Redis	6379	FORWARD_REDIS_PORT (6379)
Manticore SQL	9306	9306
Manticore HTTP	9308	9308
Elasticsearch	9200	9200
Mailpit SMTP	1025	FORWARD_MAILPIT_PORT (1025)
Mailpit Web	8025	FORWARD_MAILPIT_DASHBOARD_PORT (8025)

If a port is already in use on your host, change the corresponding FORWARD_* / APP_PORT variable in .env.

Database

On first run MariaDB creates a user/database from your .env:

DB_USERNAME=
DB_PASSWORD=
DB_DATABASE=nntmux

Import an existing SQL dump or run make artisan cmd="nntmux:install" for a fresh installation.

Backups

Add this optional service to docker-compose.yml for automated MariaDB backups:

    backup:
        image: fradelg/mysql-cron-backup
        depends_on:
            - mariadb
        restart: always
        volumes:
            - ./docker/backups:/backup
        environment:
            - MYSQL_USER=${DB_USERNAME}
            - MYSQL_PASS=${DB_PASSWORD}
            - MYSQL_DB=${DB_DATABASE}
            - CRON_TIME=0 3 * * *
            - MYSQL_HOST=mariadb
            - MYSQL_PORT=3306
            - TIMEOUT=10s
            - GZIP_LEVEL=9
            - MAX_BACKUPS=5
            - INIT_BACKUP=0
            - EXIT_BACKUP=1
        networks:
            - sail

Production

For production deployments use docker-compose.yml.prod-dist as a starting point. It includes separate webapp, worker, and scheduler services and uses the root Dockerfile (FrankenPHP-based).

cp docker-compose.yml.prod-dist docker-compose.yml
# Edit .env for production settings
docker compose up -d

Troubleshooting

Problem	Solution
Permission errors on storage/	make fix-permissions (chowns project to your host UID)
composer install permission denied	make fix-permissions, then re-run make composer-install
npm/ncu EACCES on host (package.json)	make fix-permissions chowns to host UID, not container sail
fatal: detected dubious ownership (git)	make fix-permissions registers safe.directory in the container
Container sail UID ≠ host UID	Set WWWUSER=$(id -u) / WWWGROUP=$(id -g) in .env, then make rebuild
Host artisan/npm fails with /var/www/html/... paths	Stale bootstrap/cache/config.php from a container config:cache. Run make cache-clear and prefer make optimize (dev-safe) over optimize-deploy in development
Port already in use	Change APP_PORT, FORWARD_DB_PORT, etc. in .env
Containers won't start	make logs to inspect, or make rebuild to start fresh
Stale images after upgrade	make update (pulls base images + rebuild + restart)
Need a completely clean slate	make fresh (destroys all volumes; add FORCE=1 for non-interactive)
CI / scripted teardown	make fresh FORCE=1 or make nuke FORCE=1 to skip prompts
supervisorctl not connecting	make root-shell then supervisorctl status to verify socket path

Nginx (GetPageSpeed + Brotli)

The app container's nginx is installed from the GetPageSpeed apt repo (stable branch) instead of the Ubuntu archive. This gives us a current nginx build with ABI-matched dynamic modules. The nginx-module-brotli package is installed and the brotli directives in docker/8.5/nginx.conf are enabled by default (gzip is kept as a fallback for clients without br support).

The repo is apt-pinned at priority 1001 via /etc/apt/preferences.d/getpagespeed-nginx.pref so nginx and module packages always resolve from GetPageSpeed even if Ubuntu publishes a newer version. A nginx -t is run during docker build to fail fast on any config drift.

To revert to stock Ubuntu nginx, remove the GetPageSpeed apt key, list, and preferences entries from docker/8.5/Dockerfile, drop nginx-module-brotli from the install line, re-comment the brotli block in docker/8.5/nginx.conf, and run make rebuild.